Inductive Proximity Sensor

The LZR-H110 offers a real alternative to induction loops: time gain during installation, detection of all types of vehicles and greater adaptability. This laser sensor for rising barriers is used to open, secure* and/or detect a presence. It offers great flexibility in defining the width and depth of the detection zones.

Brand: Omron,Carlo-Gavzzi,Vicro,Takex,Microsonic Sensing Distance: 5mm - 50mm Connectivity: Cable or M12 connector Supply voltage: DC four wires, two wires AC Box: PBT, IP67 Detection distance: Upto 25 mm Output: NPN / PNP + NC, SCR / NC

Inductive proximity switch 3-Wire DC Miniature Sensing range: Standard

According to DIN 19 234 SD 110/210: Amplifier with relay output SD 270: Set/reset amplifier with relay output for 2 proximity switches Power supply to proximity switch 8.2 VDC/1 k Galvanically separated output relay Load: 10 A SPDT or 8 A DPDT relay LED-indication for output ON AC or DC power supply

a a a a INDUCTIVE CYLINDRICAL PROXIMITY SWITCHES 8, 12, 18, 30 mm DIAMETER. CABLE OUTPUT C.C. 10 30 Vdc SUPPLY VERSION

Inductive proximity switch 3-wire DC High Temperature resistant Sensing range: Increased

STANDARD M18 PHOTOELECTRIC SENSORS DIFFUSE TYPE, WITH RADIAL CYLINDRICAL HOUSING AND 10 kHz WORKING FREQUENCY. SENSING DISTANCE VERSIONS 100, 200, 400 & 600, 1000 mm. CABLE OUT OR M12 PLUG-IN CONNECTOR. PLASTIC OR METAL BODY

Brand: Selet Sensing Distance: 700 Model Number: OCV87D3PNOC5 Product Type: Photoelectric sensor Voltage: 10-30 vdc Series Name: OCV87 Cable Length: 2mtr Beam sensing distance: 15 m Body reflex type sensing distance: 2 m Material : Metal Operating Temperature : -20 to 80 deg C Surface Treatment : Galvanised

Protection: Reverse polarity, internal current limiter 2 m cable or plug M12 Nickel-plated brass housing, cylindrical Diameter: M18, M30

Protection: Reverse polarity, internal current limiter 2 m cable or plug M12 Nickel-plated brass housing, cylindrical Diameter: M18, M30

Nickel-plated brass housing Housing diameter: 18 and 30 mm Sensing distance: 0 - 5 mm, 3.5 - 11 mm Protection degree IP67 2 m PVC cable

Sensing Distance: 5mm - 50mm Output: Transistor Protection: Reverse polarity,short-circuit and transients Brand: Carlo-Gavzzi,Xecro,Takex,Microsonic Size: 6.5mm M8 M12 M18 M30 Cable Length: 2 m Switching: Make or break Power supply: 10 to 40 VDC Types: Flush and non-flush

Short body, Stainless Steel Housing, Types IA, M5 w/short-circuit protection

Output configuration PNP/NPN, NO/NC (make or break switching). Connection with 2 m PUR cable or M12 plug.

Inductive proximity switch with sensing distance 10 mm flush mounted in metal or 15 mm non-flush mounted. 4-wire with both make (NO) and break (NC) switching. Flat pack housing size (W x H x D) 35 x 55 x 15 mm made in polycarbonate. Easy mounting with only two M 3.5 screws.

ICS08 series represents the optimal solution for industrial automation equipment in applications where space is limited, but long switching distance is needed,

Proximity switch in 6.5 and M8 housings. Made in accordance with NAMUR DIN 19 234. Short version in standard stainless steel housing

AC proximity switches constructed in stainless steel (1.4301) housings. Sizes available are M12, M18 and M30. Length of housing is selectable with 30 mm thread or 50 mm thread.

Brand Carlo Gavazzi Model Name/Number EI1805I020 Rated operational volt 17 to 27 VDC Protection Reverse polarity current limiter Housing material Nickel-plated brass Front Blue thermoplastic polyester Back Black thermoplastic

Sensing Distance - 4mm Mounting - Flush Voltage - 10 - 30 VDC

Sensing Distance 6mm Voltage 10-30VDC Frequency 500Hz

Sensing Distance 2 to 15 mm Material Stainless Steel Voltage 10 - 40 VDC

Half-palm size. Ideal for built-in use with smaller machines.