Carlo Gavazzi Sensors

We are the leading supplier of Motor Protection Unit/ Relay. The clients can avail the products at best market price. Main Features Motor protection: thermal image, phase loss and sequence, current imbalance, locked rotor, earth fault Electrical variables monitoring and datalogging: current, voltage, harmonic distortion, power, energy Motor control: start-stop, start-delta, emergency starting Fast connection to Modbus TCP/IP and Profibus to transmit all instantaneous variables and alarms to a central control system Application: Carlo Gavazzi offers a range of modular electronic relays to protect, control and monitor the motor. They are very effective for motors which are located in very sensitive positions, in the applications making any failure very costly (mining, water treatment, oil, gas and power stations). They allow the motor operations to be controlled, and simultaneously prevent out of service using warning alarms to solve any malfunction before the motor can be damaged. Our relays estimate the thermal motor status and prevent overheating. All the functions which control and protect the motor are freely configurable according to the needs of the plant.

We are the leading supplier of Safety Magnetic Sensors. The clients can avail the products at best market price. 1. NO+1 NC Contacts 2. Series Resistor on NO Contact 3. Cable output connection

he EAGLE ONE offers an high level of stability and reliability. It is the solution for all types of automatic doors, irrespective of the surroundings.

Stainless steel housing, cylindrical Diameter: 6.5, M8 Short versions Sensing distance: 1 to 2 mm Output: NAMUR (DIN 19234) Protection: Reverse polarity

Safety Category 2 according to EN 61496-1 and /-2 Body resolution Self-monitoring Failure alarm / diagnosis by LED Quick installation and alignment Compact profile

1. Sensor for liquid level detection 2. Built-in amplifier, Ga-As diode 3. Output: Transistor NPN/PNP or SCR, NO or NC 4.High chemical resistance to most acids and bases VP01/03: Output OFF when sensor in liquid VP02/04: Output ON when sensor in liquid 4. No electrical or thermal connection between liquid and electrical circuit LED-indication for output ON Power supply: DC types: 10 to 40 VDC AC types: 110 or 230 VAC

INDUCTIVE FORK TYPE PROXIMITY SWITCHES AIR GAP 3, 5, 10 mm

AC Frequency of 50Hz/60Hz/400Hz and over voltage output of 5A AC250V Volts Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire and other configurations Support accurate detection of 3-phase voltage and phase sequence Comes with protection function for over voltage, under voltage, loss of phase Adjustable potentiometer for allowing set value adjustment and delay value setting Wide power supply range of DC (8~35)V

Main Features: 1) Family available in four different housings. 2) Standard DIN Rail for industrial panels 3) Mini D housing for DIN rail mounting 4) Plug in housing 5) 48x48 mm housing

>M18 and M30 Housing>Sensing Distance upto 8000mm>Anologue models with 0-10Vdc or 4-20 mA>Teach functions on advanced models to configurate ser points

High Efficiency Single Phase and Three phase Unversal AC / DC Input DIN Rail, Low Profile and Enclosed types

Brand Carlo Gavazzi Range 500 - 2500 mm Connection NPN and PNP Light Type Infrared , modulate Voltage 10 - 30 V DC